Things not powered by you!

Bosch 18v Drill

[OWNERS MANUAL]

Used for boring holes.

• [INSTRUCTION VIDEO]
• When boring holes, use the thread shaped option below the chuck
• When driving hardware, use a numbered setting
• The top slider indicates the speed and torque settings of the drill. For more torque, use setting one. For more speed, use setting 2.

Bosch 18v Impact Driver

[OWNERS MANUAL]

Used for driving fasteners.

• [INSTRUCTION VIDEO]
• The impact driver puts an additional drive behind the drill, meaning it’s better for mounting hardware in comparison to making new holes

Bits Selection

Black & Decker Heat Gun

[OWNERS MANUAL]

For localized heating needs.

1. To switch the heat gun on at the low temperature setting, press the switch (1) to depress to position “I”. To switch the tool on at the high temperature setting, set the switch (1) to position “II”.
2. Allow the element to heat up for a few seconds before use
3. In use, the nozzle of the heat gun becomes extremely hot, be careful when cooling the heat gun after use.
4. To switch the tool off, set the on/off switch (1) to position “0”
5. Allow the tool to cool fully before storing!

4300 Dremel

[OWNERS MANUAL]

For sanding, polishing, and cutting.

[Quick Guide Coming Soon]

Hot Glue Gun(s)

[OWNERS MANUAL]

Puts things together.

1. Plug into electrical outlet.

2.  Insert 0.27” diameter mini glue stick into back of glue gun through the feeder tube.

3. Allow glue gun to heat for approximately 5 minutes.

4.  Squeeze trigger to dispense glue. More glue is dispensed by squeezing trigger repeatedly. Continue glue flow by adding additional glue sticks. Note: Requires approximately 2 glue sticks for initial start up.

5.  Immediately press surfaces to be bonded together.

6.  Do not pull glue sticks from glue gun. If changing glue, feed remainder of glue stick through glue gun.

7.  Unplug after use and allow glue gun to cool completely before storing.

Dual Temp Glue Gun: Use High Temperature for Wood, Plastic, Metal, Glass & more. Use Low Temperature for Floral, Fabric, Foam, Jewelry and more.